Note On Brake Pad
Check and replace regularly
1. Check frequency:
Under normal circumstances, it is recommended to check the wear degree of brake pads every 5000 kilometers. This cycle can vary depending on factors such as model, driving habits and road conditions, but regular checking is key.
When the brake pads are worn close to the limit (usually the brake pads have a wear indicator or the words "REPLACE" etc.), they should be replaced in time.
2. Replacement time:
When it is obvious that the brake performance is reduced, such as the braking distance is longer, the brake response is slow, or the brake needs more force to stop the car, it may be that the brake pads are seriously worn and need to be replaced.
When you step on the brake, you hear a harsh noise, especially the sound generated by the special wear mark on the brake pad and the friction of the brake disc, and it is also a signal to replace the brake pad.
If you feel obvious vibration when braking, it is also one of the signs of brake pad wear.
Material selection
1. Select according to your needs:
Brake pads come in a wide variety of materials, including asbestos-free organic (ceramic brake pads), semi-metal and low metal. Brake pads of different materials have different characteristics and scope of application.
2. Matching vehicle:
When selecting brake pads, ensure that they match the make, model and driving needs of the vehicle to ensure the best braking effect and safety.
Use and maintenance
1. Avoid overuse:
Prolonged or frequent use of the brake system may accelerate the wear of the brake pads. Therefore, the speed and braking frequency should be reasonably controlled during the driving process to avoid unnecessary sudden braking and long-term continuous braking.
2. Keep clean:
Check and clean the brake system regularly, especially the contact surface between the brake pad and the brake disc, to remove dust, oil and other impurities to ensure the braking effect.
3. Professional maintenance:
When replacing the brake pad, it should be operated by professional maintenance personnel to ensure that the installation is correct, firm and reliable. At the same time, the maintenance process should pay attention to check whether other parts of the brake system wear or damage, and replace or repair in time.
Matters needing attention
1. Brake pad thickness:
The thickness of brake pads is one of the important indicators to determine whether they need to be replaced. In general, the thickness of brake pads should not be lower than the minimum standards specified by the manufacturer. When the thickness of the brake pad is close to or lower than this standard, it should be replaced in time.
2. Avoid high temperature environment:
Brake pads are prone to failure or deformation in high temperature environments. Therefore, in the process of driving should avoid long-term high-speed driving or continuous downhill, which can easily lead to overheating of the brake system.
3. Adaptation period:
There may be a period of adjustment after the replacement of new brake pads. During this period, brake performance may vary or be unstable. Therefore, after replacing the new brake pads, you should drive carefully and properly run in the brake system to ensure that it works properly.
