News

How do I install Twist Lock Installation procedure 1. Positioning: Stop the trailer on a flat and stable ground, and adjust the position of the trailer so that the mounting seat...

Daily maintenance of Trailer landing gear As an important part of the trailer Daily use and maintenance is essential for the stability and safety of the trailer. Regular inspect...

Maintenance cycle of flatbed trailer Regular maintenance cycle In general, the routine maintenance cycle of trailers is recommended to be carried out every certain number of kil...

Check and replace regularly 1. Check frequency: Under normal circumstances, it is recommended to check the wear degree of brake pads every 5000 kilometers. This cycle can vary d...

How to properly install the fifth wheel of the trailer Preparatory work 1. Check the equipment: Ensure that the traction seat, traction pin, locking mechanism and other componen...

How to install the Camshaft Repair Kit correctly 1. Preparation: Ensure that the working environment is clean and dust-free to avoid impurities entering the engine. Thoroughly c...

Precautions for using Standard trailer bearing Select suitable bearings 1. According to the load and working environment selection: according to the load capacity of the trailer...

Maintenance and maintenance of Trailer parts air hose Periodic inspection 1. Appearance inspection: Regularly check whether the surface of the hose is worn, aging, crack or corr...

Factors affecting the performance of slack adjuster Design and manufacturing quality Materials and processes: The quality of materials and manufacturing processes used by slack ...

Brake pad replacement cycle In general, the replacement cycle Front brake pads: Under normal circumstances, the service life of the front brake pads is 30,000 to 50,000 kilomete...

Installation of the Standard trailer camshaft Remove old camshaft 1. Disconnect the power and brake system: Make sure the trailer is powered off and disconnect the brake system ...

How to determine the bearing maintenance cycle? 1. Work environment Working environment is one of the important factors affecting bearing life and maintenance cycle. Harsh envir...