Products

Home Products Trailer Filter system Truck Air filter Details

Standard Air Filter

Standard Air Filter Refers to a widely used class of air filtration devices designed to remove particulate impurities from the air to ensure air quality or to meet the clean air needs of a specific device

Send Inquiry

Features

Definition

Standard air filter refers to a widely used class of air filtration devices that are designed to remove particulate impurities from the air to ensure air quality or meet the clean air needs of specific equipment.

The truck Standard Air Filter is a key component to ensure the efficient operation of the engine, and its core function is to intercept dust, carbon particles, moisture and small pollutants in the air through multiple filter media (such as cellulose filter paper, glass fiber or polyester fiber, etc.) to ensure that the air entering the cylinder is clean 136. These filters usually comply with national or industry standards (such as GB/T 14295-2008, GB/T 13554-2008) and adopt a modular design, including a pre-filter layer, a high-efficiency filter element and a support structure, which can be adapted to different vehicle requirements. Its performance directly affects engine power output and stability - if the filter element is blocked, it will lead to insufficient intake, increased fuel consumption and even mechanical wear. It is recommended to check and replace the equipment every 10,000 km or half a year. In harsh environments, shorten the maintenance period. Some high-end products also incorporate oil bath separation technology or PTFE membrane materials to further improve filtration accuracy and durability.

Working principle

1. Interception effect: large dust particles do inertial motion in the air stream, and are captured directly on the filter medium (such as fibers) because of inertia.

2. Diffusion effect: Dust particles less than 1 micron do irregular diffusion movement in the air stream (Brownian motion), hit the filter medium is captured.

3. Inertial collision and interception: Dust particles move with the air flow, and when the air flow brushes the fiber surface, the dust is intercepted.

4. Electrostatic attraction: The filter media and dust particles may carry static electricity for a variety of reasons, and the dust particles are attracted to the fiber.

material

Standard air filter has a variety of materials, including glass fiber, paper, fiber materials and new composite materials. These materials have different filtration efficiency and durability and are suitable for different environments and equipment.

Scope of application

Clean workshop, clean workshop, laboratory and clean room: ensure indoor air quality and prevent particulate pollution.

Electromechanical communication equipment: prevent dust and other impurities from causing damage to the equipment.

Engine air intake: such as air filter, filter the air into the engine, protect the engine from dust wear.

Pneumatic system: As one of the pneumatic triplets, it is used for air source purification and filtration.

Performance characteristics

High filtration accuracy: it can effectively filter out particulate impurities in the air.

High filtration efficiency: Reduce the number of particles passing through the filter.

Low pressure difference: ensure smooth air flow and reduce filtration loss.

Large ash capacity: long service life, reduce the frequency of replacement.

Compact structure: save installation space, easy to install and maintain.

Maintenance and replacement

The Standard air filter will gradually accumulate dust and impurities during use, resulting in a decrease in filtration efficiency and an increase in pressure difference. Therefore, the filter needs to be checked and replaced regularly. The replacement period depends on the operating environment and device requirements. You are advised to replace the device as recommended by the manufacturer.