Equalizer Beam Semi Trailer

The semitrailer Equalizer Beam, as the name suggests, is located on the semitrailer frame and is used to balance the forces between the axles.

Balance the bearing capacity between the axles: the Equalizer Beam through its structural design, so that the vehicle in the process of driving, especially on the undulating road, the force of each axle is more average, thus extending the service life of the vehicle.

Improve vehicle stability: by balancing the force between the axles, reduce the vehicle shaking and instability caused by uneven force, and improve the driving safety of the vehicle.

orce balance:

When the semi-trailer is driving on the undulating road surface, each axle will be affected by different impact forces. Through the structural design of the Equalizer Beam, these impact forces can be distributed more evenly. It is like a "seesaw", which constantly adjusts the force state during the driving of the vehicle to ensure that the force of each axle is more uniform.

Elastic stretching motion:

In some advanced Equalizer Beam designs, buffer components are also included. When the spring is buffered by the force, the ends of the spring on both sides will be squeezed to the entire Equalizer Beam. At this time, the two fixed parts will be relatively close, and then through the damping effect of the buffer part, the two fixed parts will move towards each other relative to the middle part of the connector. This elastic expansion movement effectively reduces the friction and wear between the plate spring and the Equalizer Beam, and improves the service life of the Equalizer Beam.

Restricted range of activity:

The Equalizer Beam and the steel plate floating frame are usually connected by shaft pins and other components. The shaft pin not only plays a role in combining and limiting the activity range of the Equalizer Beam and the steel plate floating frame, but also can withstand certain wear during long-term use. However, if the axle pin wear is too serious, it will lose its balance effect, resulting in unstable vehicle driving.

Force balance and stability improvement

Balance the force of each axle: the Equalizer Beam is located in the middle of the two sets of leaf springs before and after the semi-trailer, and through its structural design and working principle, it can effectively balance the force between the axles. This enables the vehicle to maintain a more stable driving state during the driving process, especially on the undulating road surface, and reduces the vehicle shaking and instability caused by uneven force.

Improve driving safety: The improvement of force balance is directly related to the improvement of driving safety. When the force on each axle of the vehicle is uniform, the risk of vehicle loss of control caused by uneven force can be reduced, and the possibility of safety accidents can be reduced.

Extend vehicle service life

Reduce wear: The Equalizer Beam is designed to reduce friction and wear between the plate spring and the Equalizer Beam during vehicle driving. This effect of reducing wear not only extends the service life of the Equalizer Beam itself, but also protects other related components (such as leaf springs, shaft pins, etc.) from excessive wear.

Improve component durability: Through the role of the Equalizer Beam, the force of each axle is more uniform, reducing the bearing pressure of a single component. This helps to improve the durability of the various components of the vehicle and extend the service life of the entire vehicle.

Adaptability and flexibility

Adapt to different road conditions: The design of the Equalizer Beam enables it to adapt to various road conditions, whether it is on a flat highway or on a rugged mountain road, it can effectively balance the force of each axle and maintain the stable driving of the vehicle.

Flexible adjustment: Some advanced Equalizer Beam designs also include adjustable components and structures that allow the operator to flexibly adjust the Equalizer Beam according to the specific transportation needs and road conditions to achieve the best balance and driving state.

Direct factory sales with competitive pricing.
High annual production capacity to meet large orders.
Flexible and reliable, capable of handling bulk orders efficiently.

Hot Tags: equalizer beam semi trailer, China equalizer beam semi trailer manufacturers, suppliers, factory, Axle, Traction Series Products, American Type Axle for FUWA 13T, Air Filter, American Type Brake Drum, Germany Type Leaf Spring 12 100 12